Car Rear Seat Phone/Tablet Bracket

Features:
1. Enable to watch videos in the back seat, ideal for a long trip.
2. Widely compatibility, suitable for Switch/ tablet/ phone.
3. Firmly tighten without shaking, free in horizontal/vertical direction.
4. Reserved charging hole, silicone protects device/car from scratches.

Weight: About 250g
Material: PC+ABS+Silicone
Fixed Position: Back of car front seat with metal rod
Applicable Rod Diameter: 5-16mm
Applicable Rod Spacing: 30-175mm
Compatibility: For most mobile phone /for Switch (length ≥135mm)
For tablet with 12.9 inches or below (135mm≤width≤235mm)
Including: bracket*1, clamp*1

Install And Use
① Unscrew the nut on the back of the bracket.
② Insert the rotating ball of the clamp into the nut and screw it up.
③ Rotate to unscrew the two lock nuts of the clamp respectively in the arrow direction.
④ Slide to adjust the distance between the two lock buckles to make it the same distance as the chair back rod.
⑤ Clip the two lock buckles into the rod in sync and screw the two nuts.
⑥ Press "Push" switch to open clip arms at both ends, and put phone/tablet into it.